The Basics of Assessment Validation: How to Validate Assessments
The Basics of Assessment Validation: How to Validate Assessments
Blog Article
Upon receiving registration, RTOs must manage various responsibilities like annual declarations, AVETMISS reporting, and marketing compliance, with validation being a notably arduous task.
Despite our extensive coverage on validation, let's re-examine the term. ASQA states that validation is a quality check of the assessment process.
To put it differently, validation is the process of confirming the accurate parts of an RTO's assessment process and identifying what can be enhanced. A correct understanding of its components makes it less intimidating.
The 2015 SRTOs Clause 1.8 requires RTOs to make sure their assessment systems, including RPL, are compliant with training package requirements and conducted per the Principles of Assessment and Rules of Evidence.
According to the standards, two types of validation are necessary.
The first type of validation ensures that your RTO's assessment meets the requirements of the training package within your scope.
The subsequent validation type ensures assessments are in line with the principles of assessment and rules of evidence.
Thus, validation is performed both prior to and following the assessment. The first type, assessment tool validation, is the focus here.
The Fundamentals of the Two Types of Assessment Validation
An Introduction to Assessment Validation
As discussed earlier and in our prior blogs, validation involves two parts: (1) assessment tool validation and (2) post-assessment validation.
Pre-assessment validation, or assessment tool validation, is concerned with the first part of the clause, which ensures all unit requirements are met and that workbooks are fully compliant.
Post-assessment validation, in contrast, is about ensuring the implementation side, where Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.
In this article, we will emphasize assessment tool validation.
Guidelines for Conducting Assessment Tool Validation
With a clear understanding of the two types of validation, let’s focus on assessment tool validation.
Ideal Times to Conduct Assessment Tool Validation
The aim of assessment tool validation is to ensure that all elements, performance criteria, and performance and knowledge evidence are covered by your assessment tools.
This implies that any time new learning resources are obtained, assessment tool validation must be done before student use.
You don't have to wait until your next 5-year validation schedule. Validate new resources right away to ensure they’re appropriate for student use.
Nevertheless, this isn't the only occasion for this type of validation. Conduct assessment tool validation when you:
- resources are updated
- your new training products get added on scope
- reviewing your course against training product updates
- your risk assessment includes identifying your learning resources as a risk
ASQA's risk-based approach to regulation necessitates regular risk assessments by RTOs. If there are student complaints about learning resources, it's an opportune time for assessment tool validation.
Identifying Training Products for Validation
It's important to remember this validation ensures that all learning resources are compliant before use. All RTOs need to validate resources for each unit.
Getting Started with Assessment Tool Validation: Resources Needed
Training Materials
As you validate your assessment tools, you will need the complete set of your learning resources:
Mapping tool – the first document to review. It indicates which assessment items meet unit requirements, aiding in faster validation.
Learner/student workbook – ensure it is suitable as an assessment tool during validation. Check if instructions are clear and answer fields are sufficient. This is a common issue.
Assessor guide/marking guide – ensure that instructions for assessors are sufficient and clear benchmarks for each assessment item are provided. Clear benchmarks are essential for reliable assessment outcomes.
Other related resources – these might include checklists, registers, and templates developed separately from the workbook and marking guide. Ensure they are appropriate for the assessment task and meet unit requirements.
Validation Group
Clause 1.11 describes the requirements for validation panel members, indicating that validation can be performed by one or more persons. RTOs often require all trainers and assessors to attend, and sometimes industry experts are invited.
As a whole, your validation panel must have:
Vocational competencies and industry skills relevant to the unit being validated
Current knowledge and expertise in vocational teaching and learning
Either one of the following training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or an equivalent successor
Validation form/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool assists in both the validation process and documentation. It simplifies identifying how each assessment item corresponds to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It also acts as evidence that you have validated your resources prior to student use.
Although ASQA does not recommend or require a particular template for assessment tool validation, many templates are available online. These tools typically have validators review the tools in their entirety to determine if they meet the principles of assessment.
Principles of Assessment Template Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
While templates like these make validation easier, they also allow for judgment errors since there is little room for commenting on each assessment item.
A more detailed template is recommended to thoroughly inspect each unit requirement and the assessment items that align with them. Below is an example:
Element Performance Criteria Assessment Guidelines Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Requires Checking?
As outlined in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers follow assessment principles and evidence rules.
Assessment Basic Principles
Fairness – Is equal opportunity and access guaranteed for everyone in the assessment process?
Flexibility – Are multiple options available in the assessment to demonstrate competence based on different needs and preferences?
Validity website – Is the assessment assessing what it is supposed to assess? Is it a valid tool for measuring the required skill or knowledge?
Reliability – Will the assessment yield consistent results each time, regardless of the trainer? Will different assessors make the same decision on skill competence?
Evidence Rules
Validity – Is the evidence confirming that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there enough evidence to confirm the learner has the required skills and knowledge?
Authenticity – Is the assessment tool confirming that the work is the candidate’s own?
Currency – Are the assessment tools in line with current units of competency and contemporary industry practices?
Even though these are often covered in VET professional development and nationally recognised training, many tools still struggle with these requirements.
To prevent using learning resources that overlook some unit requirements, make sure to follow these guidelines:
Walk the Talk
Focus on the verbs used in the unit requirements and make sure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Complete each of the following actions at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication as per service and regulatory requirements:
changing diapers
bottle preparation, bottle-feeding infants, and cleaning equipment
solid food preparation and feeding babies
respond to infant signs and cues appropriately
prepare babies for sleep and settle them
monitor and promote physical exploration and gross motor skills suitable for the age
Having students describe the nappy-changing process for babies under 12 months old doesn’t directly meet the unit requirement. Unless the unit requirement is meant to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.
Be Cautious with Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Mind the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t suffice.
Complete or Not Competent
Observe the lists. As mentioned above, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Provide More Detail
Every assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on student competence. Consequently, ensure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What information might be included in a work package?
Possible answers could include:
Needed resources
Relevant costs
Time allocated for activities
Allocated roles and responsibilities
If an assessment item calls for several answers, specify the number of answers needed from a student. This ensures your assessment is reliable, and the evidence gathered is valid.
The same applies to assessment items with double-barrelled questions or those requiring multiple answers simultaneously. These can confuse students and assessors, as demonstrated in the sample question below:
Identify a hazard and/or environmental concern in the work area and select the most effective hazard control hierarchy.
Answers might include, but are not limited to:
Weather conditions – work area isolation, engineering, PPE
Work area and ground conditions – elimination, isolation, engineering controls
People – isolating, use of engineering controls, administrative controls
Structural hazards – substituting, isolation, use of engineering controls
Chemical hazards – isolation, use of engineering controls, administrative controls
Equipment or machinery – isolation, engineering, administration
Avoiding double-barrelled questions makes it simpler for students to respond and for assessors to accurately judge competence.
Considering these requirements, you might wonder, “Don’t learning resource developers offer audit guarantees?” However, with these guarantees, you must wait for an audit before they help rectify noncompliance. This affects your compliance history, so it's better to take a safe and compliant approach.